Tensile Load Cells
Tensile Load cells are produced to fit in the standard shackles range, 12 to 400 tonnes SWL.
Our Tensile load cells are used for measuring tension at dead-end anchor. We also produce tensile load cells as portable kits for weighing and as reference tools.
Full Scale Tensile Load:
(FS) |
Typical 1-120 tonn
Other capacities upon request |
| Maximum Tensile Load at 20°C: |
FS range x 2, below 25 tonnes
FS range x (2....1.33) above 25 t
FS range x 1.33 above 25 t |
| Temperature range: |
-20 to 60°C |
| Linearity: |
± 0,2 % FS |
| Total accuracy at ambient temperature, the accuracy demands correct bolt dimension: |
Typical 0,5% |
| TCS (Thermal Compensated Sensitivity): |
Typical 0,03% FS x (temp.-amb) |
| Output: |
1-2 mV/V / 4-20mA |
| Supply Voltage: |
Max. 15 VDC / 24 VDC |
| Electrical Connector: |
4 wire / 2 wire |
| Response time: |
2 msec / 13 msec |
| Bridge Resistance: |
4 kohm |
| Insulation Test: |
500 V AC (RMS) > GW |
| Sealing: |
IP67 |
| Material: |
Stainless Steel |